VastuShastra is an ancient science energy flow throughout the house/office/factory that allows inflow of fresh air and natural light that promotes health, wealth, peace and happiness.
The most ancient science of architecture that goes back to the Vedic ages,it is composed of specific rules and regulations, set down by sages of those times, that an architect / builder / owner was expected to religiously follow to avoid coming under negative or evil influences.
Today, it is looked upon as a highly evolved, comprehensive building philosophy in which directions and shapes are the most vital aspects of designing.Right from the selection of site to correct slope of land down to the shape of the building, this oldest form of architecture covers
nearly every aspect of construction. Not only for houses but temples, palaces, forts,offices...just about every possible form of construction. Often providing relief if not cures to physical or
emotional problems simply by relocating an entrance, window or room.
Some of the important points made therein are :Today, it is looked upon as a highly evolved, comprehensive building philosophy in which directions and shapes are the most vital aspects of designing.Right from the selection of site to correct slope of land down to the shape of the building, this oldest form of architecture covers
nearly every aspect of construction. Not only for houses but temples, palaces, forts,offices...just about every possible form of construction. Often providing relief if not cures to physical or
emotional problems simply by relocating an entrance, window or room.
Directional Alignment
| |
![]() ![]() Thegeometrical axis of the plot should be properly aligned with the axisof the earth's magnetic field. i.e. one set of boundaries should beparallel to the north south axis and the other to the east -west axisas shown in the figure (a) and (b). |
| Figure (a) shows directional alignment | (b) shows a non directionally aligned plot. |
Shape Of The Site
Symmetrical shapes like square or rectangular, circular &
hexagonalpromote overall growth, increases mental capabilities and
generatesprosperity.
Asymmetricalshapes like oval, triangular, parallelogram, star &
trident aredeemed inauspicious.
hexagonalpromote overall growth, increases mental capabilities and
generatesprosperity.
trident aredeemed inauspicious.
| SHAPE | EFFECTS |
| Rectangular | Overall Growth |
| Hexagonal | Prosperity |
Slope Of The Land Surface
The surface should be elevated towards the southern and western
sidesand should be lower in northern and eastern sides for overall
growthand prosperity.
sidesand should be lower in northern and eastern sides for overall
growthand prosperity.
![]() | The Land should be elevated towards south and west sides and it should be lower in NORTH and EAST sides for over all growth and happiness. If the land is-- HIGH IN NORTH OR EAST LOW IN SOUTH-EAST LOW IN SOUTH LOW IN SOUTH-WEST LOW IN WEST LOW IN NORTH-WEST LOW IN CENTRE, It can have adverse effects. |
Impact of Gates At Various Locations
Eastern Side : The third and fourth gate promote prosperity.
Southern Side : The twelfth gate enhances growth.
Western Side : The twentieth and twenty-first gates stimulate
financial growth.
Northern Side : The twenty-seventh, twenty-eighth and
twenty-ninthgates promote happiness,
financial growth and overall gain respectively.
financial growth.
twenty-ninthgates promote happiness,
financial growth and overall gain respectively.
![]() | Ofall the positions of the gates depicted in the figure, the positions that are favourable are in the
All the other placements of the gates ( marked Cross ) prove to beunfavourable. |
Brahmasthan (Central Zone of the Building)
and beam.
area as shown in the Figures (a) and (b)
![]() For Figure (a) Jurisdiction of brahmsthan in a square building as shownby the central square ABCD | ![]() For Figure (b) Jurisdiction of brahmsthan in a rectangular building isshown by a central "STAR" |
The Staircase
Should be in the western or northern side of the building.
Turnings should be in the clockwise direction.
On reaching the upper floor, the facing should be towards south or east.
Inner Planning of a House
The oven should ideally be in the south-east zone.
Toilets should not be in the north-eastern, central and south-western zones.
The most south-western location is the ideal position for your master bedroom.
Position the boy's room in the northern or eastern side while thegirl's and
guest room are to be in the north-western parts.
Place the beds in southerly or easterly direction.
guest room are to be in the north-western parts.

Theprovisions shown in the side diagram are as per the living style in theancient times. However considering the requirements of the modern daysit can be rearranged based on the following guide lines
|
Inner Planning of an Office
The shape of the cabin should be a regular square or a perfect rectangle.
The opening for the door should be free from any obstacle.
Doors should open inwards while entering a cabin.
The master chamber should either be in the south-west or nearest
to south- west direction.
Chambers of directors / managers / senior staff should be in the
southern & western zones. While that of the junior staff
should bein the north-west, north, north-east, east and south-east.
Pantry and toilets must be in north-eastern, central &
south-western sections.
to south- west direction.
southern & western zones. While that of the junior staff
should bein the north-west, north, north-east, east and south-east.
south-western sections.

While making the interior of an office the following guidelines have to kept in mind.
|
Internal Planning of any Industrial Building
Heavy plant and machinery should be installed in the south-western,
southern & western parts.
Light weight and auxillary machines should be in the northern &
eastern zones.
Install boiler, AC panels, generator, heater, dryer, oven, furnace etc.
in the north-west & east sections.
Toilets should be placed in the north-east, centre or south-west.
Make sure not to place spare parts stores in the north-west, centre
& south-east.
Rest rooms for labour should be in the northern & eastern
zones.
southern & western parts.
eastern zones.
in the north-west & east sections.
& south-east.
zones.

| 1. | heavy plant machinery should be installed in the South-West, South and West Zones |
| 2. | Light Weight and Auxillary machines should be installed in North and East Zones |
| 3. | Boiler/AC Panels/ Generetor/Heater/Dyer/Oven/Furnace etc are Best inthe South East but can also be installed in the North-West and EastZones. |
| 4. | Toilets or Fire/Power installations should not be provided in theNorth-East, Center and South-West zones. |








0 comments:
Post a Comment